Share Capital Information (December 31, 2012)

Phone: 250-868-8445

Toll Free: 800-647-3303

Fax: 250-868-8493

Email: info@strathmoreminerals.com

Website: www.strathmoreminerals.com

Strathmore is one of the largest holders of in-ground uranium resources in the United States. The Company's goal is to become a leading uranium producer in the United States. Its core projects are located in the two largest historical uranium producing regions: the Grants Uranium District in New Mexico and the Gas Hills Uranium District in Wyoming.

Strathmore is advancing two core uranium development projects towards production: Roca Honda in New Mexico and the Gas Hills in Wyoming. In 2007, Roca Honda was partnered with Sumitomo Corp of Japan under the jointly owned subsidiary Roca Honda Resources LLC ("RHR"). In October 2009, RHR submitted its Roca mine permit application. A mine permit decision is expected in 2013. In February 2012, Strathmore optioned its Gas Hills uranium properties to Korea Electric Power Corp. (KEPCO), as part of a two Phase exploration, development and permitting program. Phase I is continuing. KEPCO can earn-in up to 40% of the Gas Hills by electing to proceed to Phase II and by incurring expenditures of US $32 million over three years beginning in 2013. A decision is expected by Q3 2013. Strathmore submitted its Gas Hills mine permit application in November, 2012.

In February, 2012, KEPCO  became  the Company’s largest shareholder with an 11.8% equity stake, by completing a US $8 million common share private placement at a price of C$0.55 per share. In May, Strathmore acquired Saratoga Gold Company Ltd and its "Copper King" gold-copper project in Wyoming.

The technical information in the above table has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed by David Miller, Chief Executive Officer for Strathmore Minerals Corp., PG 363 Wyoming and Society for Mining, Metallurgy & Exploration Registered Member 2205106RM, a Qualified Person under National Instrument 43-101. It should be noted that mineral resources, which are not mineral reserves, do not have demonstrated economic viability.

All NI 43-101 technical reports referenced in this table can be reviewed in their entirety on SEDAR, www.sedar.com or the Company's website,www.strathmoreminerals.com.

* The foregoing historical estimates presented in the table above were completed prior to the implementation of National Instrument 43-101. Given the quality of the historic work completed on the properties in Wyoming and New Mexico stated herein and the production history of Gas Hills Uranium District and the Grants Mineral District, the Company believes the historical estimates to be both relevant and reliable. However, a qualified person has not completed sufficient work to classify the historical estimates as current mineral resources, and the Company is not treating the historical estimates as current mineral resources. Hence, they should not be relied upon. It should be noted that mineral resources, which are not mineral reserves, do not have demonstrated economic viability. The technical information in the above table has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed by David Miller, Chief Executive Officer for Strathmore Minerals Corp., PG 363 Wyoming and Society for Mining, Metallurgy & Exploration Registered Member 2205106RM, a Qualified Person under National Instrument 43-101.

The modeling and estimation of gold and copper resources were prepared under the supervision of Paul G. Tietz, of Mine Development Associates, Reno, Nevada. Mr. Tietz is a Certified Professional Geologist (#11004) with the American Institute of Professional Geologists, and an independent and Qualified Person as defined in NI 43-101. Mr. Tietz visited the Copper King Property on May 29, 2012 and inspected the project site and the core storage facility. Mr. Tietz is of the opinion that the data verification procedures support the geologic interpretations and confirm the quality of the data base. It should be noted that mineral resources, which are not mineral reserves, do not have demonstrated economic viability.

The technical information on this webpage has been reviewed by David Miller, Chief Executive Officer for Strathmore Minerals Corp., PG 363 Wyoming and Society for Mining, Metallurgy & Exploration Registered Member 2205106RM and a Qualified Person under National Instrument 43-101.

Roca Honda, New Mexico: Roca Honda Resources LLC — Strathmore 60% / Sumitomo Corp. (Japan) 40%

On October 27, 2009, Strathmore announced that it has submitted a mine permit application for the proposed development of its flagship Roca Honda underground uranium project in the Grants Mineral District, New Mexico. This property, which is situated on public lands managed by the US Forest Service and the State of New Mexico, is held by Strathmore and Sumitomo Corporation of Japan, in their jointly owned subsidiary Roca Honda Resources LLC (RHR). Roca Honda represents one of the largest proposed uranium mines in the United States in over thirty years. Development is subject to obtaining the necessary regulatory approvals and a positive production decision.

The five volumes of supporting documents that comprise this application include:
1. Application — Documentation;
2. Sampling and Analysis Plan;
3. Baseline Data Report;
4. Mine Operations Plan; and
5. Reclamation Plan.

Roca Honda Project Summary

The following summarizes the extensive work completed to advance the Roca Honda project to the permit application submission stage.

• March 2004: Roca Honda Property acquired along with the Kerr McGee uranium data base.
• August 2005: Strathmore opens New Mexico Operations, Environmental, Permitting, and Regulatory Affairs office in Santa Fe.
• October 2005: Strathmore acquires 640 acre New Mexico State Lease contiguous to Roca Honda.
• April, 2006: NI 43-101 technical report and resource estimate completed.
• June 2006: Strathmore initiates studies for an underground mine and a mill in New Mexico.
• September 2006: Strathmore begins permitting process at Roca Honda.
• November 2006: Strathmore purchases land for a potential mill site in Ambrosia Lake District near the Roca Honda project.
• July 2007: Strathmore completes joint venture agreement with Sumitomo Corporation for the development of the Roca Honda project. RHR and a Joint Management Committee to oversee the project are created.
• April 2008: Completed a 30% mill design report that presents the preliminary layout and equipment configuration for a 3,500 ton per day throughput capacity expandable to 7,000 tons per day.
• May 2008: NI-43-101 report updated.
• September 2008: Positive core assays received from monitor well drilling.
• November 2008: Sampling and Analysis Plan submitted for regulatory review.
• January 2009: Water Discharge Plan submitted for regulatory review.
• April 2009: Roca Honda Water Discharge Permit deemed "administratively complete".
• April 2009: Sampling and Analysis Plan deemed "administratively complete".
• October 2009: Mine Permit Application submitted to state regulatory authorities and the US Forest Service.
• December 2009: Mine Permit Application deemed "administratively complete".
• March 2010: Scott Wilson Roscoe Postle Associates Inc. commissioned to prepare Roca Honda feasibility study.
• December 2010: Public information meetings held.
• January 2011: Environmental Impact Statement (EIS) preparation underway.
• August 2011:  Detailed Reclamation Plan and submitted it to the New Mexico Mining and Minerals Division.
• September 2011:  Mine dewatering permit application submitted to the Office of the New Mexico State Engineer.
• October 2011: Agreement signed between RHR, the United States Forest Service and Mangi Environmental Group  for a definitive schedule that commits to completing the EIS by December 2012.
• October 2012: Preliminary Economic Assessment (PEA) and updated NI 43-101 compliant resource estimate completed by Roscoe Postle Associates Inc.
• December 2012: Draft Environmental Impact Statement Completed and submitted to the US Government Printing Office.
• December 2012: Pre-submittal audit performed with the Nuclear Regulatory Commission for reviewing the draft uranium mill license application.
• March 2013: Draft Environmental Impact Statement (DEIS) published in the Federal Register. The publication of the DEIS starts the 60 day public comment period. Two "open-house" public meetings were held in April.

Strathmore cautions that the PEA is preliminary in nature and includes inferred resources that are considered to be too speculative geologically for economic consideration that would enable them to be classified as mineral reserves. Mineral resources are not mineral reserves and do not have demonstrated economic viability. There is no certainty that the PEA will be realized.

The economic evaluation of the Roca Honda uranium resource was prepared under the supervision of Stuart E. Collins of Roscoe Postle (USA) Ltd., Lakewood, Colorado. Mr. Collins is a Registered Professional Mining Engineer in the state of Colorado, and is a registered member of the Society for Mining and Metallurgy, and Exploration, and an independent and Qualified Person as defined in NI 43-101.

Summary of Roca Honda Mineral Resources as at August 9, 2011:
Measured and Indicated Resources:

Notes:

    1. CIM definitions were followed for Mineral Resources.

    2. The Qualified Person for this Mineral Resource estimate is Patti Nakai-Lajoie, P.Geo.

    3. Mineral Resources are estimated using a cut-off grade of 0.13% U3O8.

    4. A minimum mining thickness of six feet was used.

    5. Numbers may not add due to rounding.

The modeling and estimation of the uranium resources were prepared under the supervision of Patti Nakai-Lajoie, P.Geo. and Principal Geologist, RPA. Ms. Nakai-Lajoie is a Professional Geoscientist in the Province of Ontario and an independent and Qualified Person as defined in NI 43-101. Ms. Nakai-Lajoie visited the Roca Honda Property on May 10-12, 2011 and is of the opinion that the data verification procedures support the geologic interpretations and confirm the quality of the database. It should be noted that mineral resources, which are not mineral reserves, do not have demonstrated economic viability.

On March 18, 2013, Strathmore announced that the that the US Forest Service ("USFS") had published the Draft Environmental Impact Statement ("DEIS") for the Roca Honda project. Two "open-house" public meeting were held in Grants and Gallup, New Mexico, in mid-April, which provided an opportunity for the public to discuss the project, and submit oral and written comments. This process will ultimately lead to the completion of the Final Environmental Impact Statement and the Roca Honda mine permit Record of Decision expected later this year. In addition, RHR is developing the baseline data and is completing the engineering design for its associated mill project. At the Peña Ranch Mill Site, preparation  and submission of the Nuclear Regulatory Commission mill license application will continue throughout 2013.

Gas Hills, Wyoming: Strathmore 100% / Korea Electric Power Corp. (KEPCO) 40% earn-in

The Gas Hills Uranium District was the most prolific uranium mining region in Wyoming with several operating companies producing in excess of 100 million pounds of uranium from 1957 to the 1980's. It is located 45 miles east of Riverton Wyoming, home of the Company's US exploration and development office and is accessible by paved road. Historical production was from open pit mining from surface to 500 feet deep where the uranium is hosted within roll-front deposits. The areas were extensively drilled in the 1970's and planned for open-pit development during the 1980's primarily by Federal-American Partners (FAP). John DeJoia, Sr. VP New Mexico Operations, Jim Crouch, VP Wyoming Operations, and Tom Powell, Strathmore's Senior Landman, all have extensive experience in mining management in the Gas Hills during the 1970's and 1980's.

Strathmore and Cameco are the dominant land holders in the Gas Hills Uranium District. With over 35,000 acres (13,000 Ha) of mineral claims, the Company regards this project as a core holding for the development of future long-term uranium production in the United States. Strathmore’s 100% owned portfolio includes eight areas of known mineralization, six of which were previously permitted for mining. The Company been actively advancing its mine permit application for submittal to the State of Wyoming and a Source Materials License application to the US Nuclear Regulatory Commission. Long-term plans are for the permitting and sequential development of several open pit deposits found in the Main Gas Hills area, and for the exploration and development of the Beaver Rim area to the south.

In February 2012, Strathmore completed a US $8 million private placement with KEPCO. Proceeds from this share placement be used to fund the 2012 Phase I exploration, development and permitting of the Gas Hills uranium properties. Exploration drilling in the prospective 16,000 acre Beaver Rim area to the south of the Main Gas Hills open pits will be undertaken for the first time by Strathmore as part of the Phase I program.KEPCO retains an option to participate in a Phase II development program by incurring US $32 million in expenditures over the subsequent three years beginning in 2013. In addition, KEPCO will be entitled to the delivery of uranium "in kind" from any future production from the Gas Hills based on their proportionate ownership interest.

As part of the Phase I US$8 million Gas Hills development program, Strathmore completed 279 rotary drill holes, including 21 holes cored for recovery of mineralized samples for assay purposes.  A total of 109,920 feet of drilling, including  5,040 feet of core drilling was completed in 2012, and used in this latest Gas Hills Technical Report. Additional drilling occurred after the cutoff date for receipt of drilling data used in this technical report, but terminated early in December due to winter weather constraints.  The remaining portion of the Phase I drill program is scheduled to resume by May 2013.

On April 24, 2013, Strathmore filed a new National Instrument 43-101 Technical Report with an updated resource estimate for its Gas Hills Uranium Properties in Wyoming. The technical report was prepared by Chlumsky, Armbrust & Meyer LLC ("CAM") of Denver, Colorado, and is titled, "National Instrument 43-101 Technical Report, Update of Gas Hills Uranium Project, Fremont and Natrona Counties, Wyoming USA", and dated March 22, 2013. It replaces the previous NI 43-101 technical report completed by the same author, and dated July 31, 2012.

The following tables summarize the Gas Hills Technical Report's new NI 43-101 mineral resource estimates, in addition to the remaining non-compliant historical estimates and exploration targets that merit further exploration.

CAM reviewed the geometry of the mineralization in three dimensions using a 1' of 0.035% U3O8 and 2' of 0.05% U3O8 cutoff grades and completing a grade X thickness contouring. Tons and contained pounds are reported to the nearest 100,000. Average grade and average thickness are reported to two and one decimal places respectively. This does not imply this degree of accuracy; the usual accuracy of an inferred resource estimate is less than one significant digit. Cutoffs for grade and thickness are applied to each mineralized intercept used in the resource estimate. Cutoff for grade thickness is applied to the contour map. It should be noted that mineral resources, which are not mineral reserves, do not have demonstrated economic viability.

The historic estimates in Table 3 were completed prior to Strathmore's acquisition of these properties and generated by American Nuclear Corporation in 1985 and Pathfinder Mines Corporation (Frazier-Lamac only) in 1996, using accepted engineering practices at those times. Although the exact details of the historic estimates are not available, they appear to have been done using the "nearest neighbor" method for grade and grade thickness to calculate tons and pounds. Given the extensive mineral production in the Gas Hills Uranium District by experienced mining companies, and the quality of their historical work completed, the Company believes these historical resource estimates to be relevant and reliable. However, a Qualified Person has not completed sufficient work to verify and classify the historical estimates as current mineral resources, and the Company is not treating the historical estimates as current mineral resources. Hence, they should not be relied upon. Additional work including confirmation drilling, sampling and chemical assay verification, and other technical support work, as deemed necessary, is required in order to verify the historical estimates as a current mineral resource.

Exploration Targets

The Gas Hills project has several exploration targets believed to contain uranium mineralization that merit further exploration.  These include the remainder of the Bullrush and Loco-Lee properties where only portions of the historical resources were verified as compliant mineral resources, and the Day Loma NE & SE, Frazier-Lamac, George-Ver/Antelope, Jeep South, and Tablestakes targets.  The characteristics of each target such as grade, length of mineralized trend, width and thickness can only be projected from nearby areas containing well-defined mineralization.  CAM believes that these exploration targets have significant potential for the discovery of additional uranium mineralization in the Main Gas Hills area. Further details for each target area are highlighted in the Gas Hills Technical Report. In addition, Strathmore initiated exploration drilling at the Beaver Rim, to the south of the Main Gas Hills area.  A total of 34 holes were drilled, which confirmed the presence of “roll-front” uranium mineralization at depths between 900-1,200 feet.  Extensive drilling will be required to fully evaluate this area.

Copper King, Wyoming (Strathmore 100%)

In May 2012, Strathmore acquired all of the issued and outstanding shares of privately held Saratoga Gold Company Ltd. ("Saratoga") Saratoga's primary asset is the "Copper King Property", which comprises two State of Wyoming leases totalling 1,120 contiguous acres, located in the Silver Crown Mining District in Wyoming. In addition, Saratoga holds 52 lode mining claims in the State of Montana near Tintina Resources' Black Butte copper-cobalt-silver project (formerly known as Sheep Creek).

Copper King is a shear-zone controlled Au-Cu mineralized deposit, enveloped within a larger shell of disseminated and stockwork mineralization. Historically, the property has been explored by several operators before being acquired by Saratoga in 2006. In 2007, Saratoga contracted Mine Development Associates (MDA) of Reno Nevada, who prepared a NI 43-101 technical report. In their report, MDA identified that at least seven previous mineral resource/reserve estimates have been calculated for the Copper King Property since 1973, none of which are NI 43-101 compliant.

Strathmore contracted MDA to continue the work and prepare an updated NI 43-101 technical report to include a current resources estimate and Preliminary Economic Assessment (PEA). The report entitled "Technical Report on the Copper King Project, Laramie County, Wyoming," dated August 24th 2012, is authored by Paul Tietz, CPG and Neil Prenn, P. Eng, both Qualified Persons as defined by NI 43-101.

PEA Summary:

• Base case estimated pre-tax Net Present Value (5% discount), including the 5% Wyoming State Royalty, of US $159.5 million and internal rate of return of 31.2%, using US $1,100/oz gold and US $3.00/lb copper;
• Mine life (LOM) of 18 years by open-pit method, with an average processing rate of 10,000 tons/day using a flotation plant producing a gold-copper concentrate;
• Average annual production over the life of the mine is 38,655 ounces of gold and 10.47 million lbs of copper; Estimated initial base case capital cost, including contingencies, of ~ US $104.06 million. Payback 2.365 years.

The economic evaluation of the Copper King gold and copper resources was prepared under the supervision of Neil Prenn of Mine Development Associates, Reno, Nevada. Mr. Prenn is a Registered Professional Mining Engineer in the state of Nevada (#7844), member of the Mining and Metallurgical Society of America, and an independent and Qualified Person as defined in NI 43-101.Strathmore cautions that the PEA is preliminary in nature and includes inferred resources that are considered to be too speculative geologically for economic consideration that would enable them to be classified as mineral reserves. Mineral resources are not mineral reserves and do not have demonstrated economic viability. There is no certainty that the PEA will be realized.

The modeling and estimation of gold and copper resources were prepared under the supervision of Paul G. Tietz, of Mine Development Associates, Reno, Nevada. Mr. Tietz is a Certified Professional Geologist (#11004) with the American Institute of Professional Geologists, and an independent and Qualified Person as defined in NI 43-101. Mr. Tietz visited the Copper King Property on May 29, 2012 and inspected the project site and the core storage facility. Mr. Tietz is of the opinion that the data verification procedures support the geologic interpretations and confirm the quality of the data base. It should be noted that mineral resources, which are not mineral reserves, do not have demonstrated economic viability.

The deposit is open at depth, and to the southeast and west. Strathmore is reviewing plans to determine how best to advance this project.

The technical information on this webpage has been reviewed by David Miller, Chief Executive Officer for Strathmore Minerals Corp., and a Qualified Person under National Instrument 43-101.

Church Rock, Grants Mineral District, New Mexico (Strathmore 100%)

Strathmore's 640 acre Church Rock Property was acquired from Rio Algom Corporation, successor to the Kerr-McGee Nuclear Corporation, in 2004. Historic scientific and technical information compiled by Kerr-McGee shows that 165 drill holes totalling 306,000 feet drilled were completed on the Church Rock property from the late 1960s to 1991 (data from drill summary sheets). Most of the 165 drill holes were subsequently identified and marked by Strathmore during field inspections.

In 2005, the Company opened a development office in Santa Fe, and began preparations for permitting this project. Work was subsequently abandoned when litigation challenging Uranium Resources Inc.'s (URI) plans to advance a neighbouring project, also known as Church Rock ensued (See press release dated July 6, 2010 for further details). Favourable court rulings announced in 2010 cleared the way for URI to begin mine development. URI plans to begin production by mid-2013. Strathmore is considering future disposition plans for its Church Rock property along with its other non-core properties.

An historical Measured and Indicated mineral resource estimate reported by Kerr-McGee in 1979 totalled 10.9 million pounds U3O8 based on 6,050,000 tons at an average grade of 0.09% U3O8. Kerr McGee's Measured and Indicated mineral resource categories are most likely comparable to CIM Measured and Indicated mineral resource categories. In 1995, Rio Algom LLC, the successor company to Kerr-McGee, prepared a resource estimate utilizing Kerr-McGee's methodology, but using a higher cut-off grade of 5 feet of 0.10%. An historical Measured resource estimate totalling 5,426,000 lbs U3O8 based on 2,532,000 tons at an average grade of 0.11% U3O8, an Indicated resource estimate totalling 76,000 lbs U3O8 based on 34,000 tons at an average grade of 0.11% U3O8, and a total Measured & Indicated Resource estimate of 5,502,000 lbs U3O8 based on 2,564,000 tons at a grade of 0.11% U3O8 was provided. Strathmore cautions readers that the Company is not treating either of these two historical resource estimates as current mineral resources as a qualified person has not completed sufficient work to verify and classify these historic estimates as a current mineral resources.

The Kerr-McGee and Rio Algom LLC historical estimates stated herein were completed prior to the implementation of the National Instrument 43-101. Given the extensive mineral production in the Church Rock and Crownpoint areas (approximately 16 million pounds) and the experienced companies and the quality of their historical work completed, the Company believes these historical resource estimates to be relevant and reliable. However, a qualified person has not completed sufficient work to verify and classify these historical resource estimates as current mineral resources, and the Company is not treating the historical resource estimates as current mineral resources. Additional work including confirmation drilling, sampling and chemical assay verification, and other technical support work as deemed necessary, is required in order to verify the historical estimates as a current mineral resource.

Marquez, New Mexico: Strathmore 100%

The Marquez Property comprises 14,582 acres (~ 5,900 Ha), and includes the western extent of the historically known Marquez/Bokum ore body. The property was previously explored during the 1970s and 1980s by Kerr-McGee Resources Corporation, which at the time was one of the largest uranium mining companies in the world. Kerr-McGee drilled in excess of 390 exploratory drill holes (>800,000 feet total drilling) on the main property. In the late 1970s development of the Marquez mine began. Conventional underground production was expected to begin in the early 1980s and the Bokum mill was constructed approximately one mile away on an adjoining property. The Marquez project was abandoned and the mill was subsequently dismantled when demand for uranium and the uranium price declined in the 1980s. Strathmore acquired the Marquez deposit in a private transaction in 2007.

In June 2010, Strathmore completed and SEDAR filed a National Instrument 43-101 technical report for the Marquez property. The Marquez Property is a non-core project that is available for joint venture or sale.

The NI 43-101 resource estimates presented in the above table were taken from the NI 43-101 report entitled "Marquez Uranium Property, McKinley and Sandoval Counties, New Mexico, National Instrument 43-101 Mineral Resource Report", dated June 10, 2010, and prepared by M. Hassan Alief, C.P.G., AIPG 11134, a qualified and independent person under National Instrument Policy 43-101. It should be noted that mineral resources which are not mineral reserves do not have demonstrated economic viability as defined by the NI 43-101 guidelines. The technical information in the above table has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 and reviewed by David Miller, Chief Executive Officer for Strathmore Minerals Corp., PG 363 Wyoming and Society for Mining, Metallurgy & Exploration Registered Member 2205106RM, a Qualified Person under National Instrument 43-101.

The information presented herein contains "forward-looking information" that is based on Strathmore Minerals Corp.'s current expectations, estimates, forecasts and projections. This forward-looking information includes, among other things, statements with respect to Strathmore's exploration and development plans, outlook and business strategy. The words "may", "would", "could", "should", "will", "likely", "expect," "anticipate," "intend", "estimate", "plan", "forecast", "project" and "believe" or other similar words and phrases are intended to identify forward-looking information.

Forward-looking information is subject to known and unknown risks, uncertainties and other factors that may cause Strathmore's actual results, level of activity, performance or achievements to be materially different from those expressed or implied by such forward-looking information. Such factors include, but are not limited to: uncertainties related to the historical resource estimates, the work expenditure commitments; the ability to raise sufficient capital to fund future exploration or development programs; changes in economic conditions or financial markets; changes in input prices; litigation; legislative, environmental and other judicial, regulatory, political and competitive developments; technological or operational difficulties or an inability to obtain permits required in connection with maintaining, or advancing projects; and labour relations matters.

This list is not exhaustive of the factors that may affect Strathmore’s forward-looking information. These and other factors should be considered carefully and readers should not place undue reliance on such forward-looking information. Strathmore Minerals Corp. disclaims any intention or obligation to update or revise forward-looking information, whether as a result of new information, future events or otherwise.

BNN Uranium Outlook Interview With Mickey Fulp

Strathmore Minerals Corporation Financial Statements and Management Discussion & Analysis

Corporate Profile on Stockhouse

David R. Miller PG (Wyoming) CEO and Director

David Miller is the Chief Executive Officer of Strathmore Minerals Corp. David's primary professional focus has been on uranium exploration, development, and mining, and his career has spanned over 20 years with a chain of companies that started with Utah International and evolved into AREVA, the French Nuclear Power Conglomerate. In addition he has consulted extensively for the IAEA (International Atomic Energy Commission) in Austria and China. David is a recognized expert in the nuclear and energy field and has been seen, heard, and read in the New York Times, BBC, CNBC, CNN, Business News Network, Wall Street Journal, Globe and Mail, and Barron's. He is also a co-author of "Investing in the Great Uranium Bull Market." A fifth term member of the Wyoming Legislature, serving District 55 — Riverton, David has served on Minerals, Revenue, Education, Corporations, and Health & Labor Committees. He was an original appointee to the Wyoming Energy Commission and currently serves on the NCSL High Level Radioactive Waste Committee. David graduated from the University of Missouri with a degree in Geology and is a Registered Professional Geologist in Wyoming. Mr. Miller is the architect responsible for assembling Strathmore’s uranium property acquisitions in 1997, renewing it in 2003, when the uranium price turned upward, and subsequently implementing the Company’s current development strategy. He was appointed President in 2004 and CEO in 2008.

Steven Khan MBA, CFA Chairman, President and Director

Steven Khan has spent close to twenty years in all aspects of the investment industry, including retail, and later institutional sales, corporate finance, capital markets, and investment banking. He has held several senior management roles including: Executive Vice-President, President, Chief Executive Officer, and Chairman of a number of regional and national full service Canadian investment brokerage houses that mostly focused on venture capital financings. In 2003, he started his own consulting firm that focused on business plan development and capital fund raising for a number of early stage private and public companies. In the past several years, Mr. Khan has successfully initiated, completed or partnered several major corporate development initiatives both domestically and internationally, including government partnered ventures in China and Korea. Mr. Khan was also an instrumental part of the team that negotiated Strathmore’s Roca Honda Joint Venture with Sumitomo Corp of Japan in 2007. In January 2008, after serving as Executive Vice-President since 2003, Mr. Khan accepted the position of President of Strathmore Minerals Corp. A graduate of the University of British Columbia with a BSc. (1978) and MBA (1983), Mr. Khan also holds a Chartered Financial Analyst designation (CFA), is a member of the CFA Institute, and for many years was a long-time Fellow of the Canadian Securities Institute.

© 2013 Canadian Newspaper Services International Limited